On-call Rex-Royal service
Rex-Royal repair across Mississauga for offices, cafes, hotels, and restaurants. On-site response in hours on most calls. Independent specialists in commercial coffee equipment, no contract pressure.
We'll get back to you today.
Thanks. We received your request.
A Grajqevci technician will get back to you today to confirm your machine and book the visit. If it's urgent, call us directly at (289) 217-3796.
Something went wrong sending your request.
Please try again, or call us directly at (289) 217-3796 and we'll book your service over the phone. You can also email support@grajqevci.com.
Mississauga response · Same-day
Mississauga operators call us when a Rex-Royal machine fails because the alternative is a generalist guessing at a service manual. We bring platform-specific tooling, the right wear parts, and the experience to fix the cause, not the symptom.
Mississauga market context
Mississauga is the Canadian head-office capital, with over 80 Fortune 500 operations spread across Airport Corporate Centre, Meadowvale Business Park, Sheridan Park R&D, and Heartland. The coffee machine install base reflects that: corporate cafeterias feeding 100-plus staff, executive floors with super-automatics in client lounges, and the Pearson hotel cluster running machines around the clock. Multi-unit accounts dominate the call sheet.
From recent service calls
Why Grajqevci
Call in the morning and a technician is usually on-site before the day is out. Most Rex-Royal jobs get diagnosed and fixed on the first visit.
Commercial coffee equipment is all we do, and Rex-Royal is one of the platforms we know best. Not a generalist guessing at a service manual. Genuine OEM parts, industry-standard procedures.
Flat rate for the visit, with parts billed separately. For bigger jobs you'll see a written quote on-site before we proceed.
Mississauga dispatch
Trusted by Toronto's most demanding teams
Our services
Boilers, grinders, brew units, milk systems, touchscreens, error codes. We troubleshoot the issue and quote parts before any work begins.
Plumbed-in or self-contained, we handle water filtration, calibration, and staff onboarding so your machine pours perfectly from day one.
Scheduled servicing tuned to your daily volume. Gaskets, seals, descaling, milk system overhaul. Extends machine life by years.
Rex-Royal faults we diagnose
Every issue below comes with a description of what causes it and what we do to resolve it. If yours isn't listed, call us anyway.
Burr wear is the usual cause, with calibration drift behind it. On the twin-grinder S300 and the up-to-three-grinder S500 one grinder often wears faster than the others. We weigh dose per grinder across a run of shots, measure the burr gap, recalibrate each side, and replace burrs that are past spec.
A small stone or other foreign object riding in with the beans, beans bridging above the throat, or a stuck hopper gate. We open the grinder, clear the obstruction, inspect the burrs for chips, replace them if damaged, and confirm the hopper feeds consistently.
On the touchscreen S300 and S500 this is usually a firmware hang rather than dead hardware. We run a controlled reset, check the firmware version, reflash from a known-good image if it sticks, and replace the display module only when the touch panel itself has failed.
We read the full fault log through the service interface, pin down whether the root cause is a sensor, valve, motor, or board, replace the specific failed component, and clear the log. Most error codes resolve in a single visit.
A grounds drawer not seated, a full-drawer sensor misreading, or a blocked drainage path will lock out brewing. We check the drawer sensor, clear the drainage, and replace the sensor if it reads unreliably so the machine stops false-stopping mid-service.
A level sensor in the cleaning circuit misreading, a blockage in the cleaning path, or the wrong cleaning tablet dosing. We diagnose where the cycle stalls, clear the circuit, verify the dosing, and watch a full cycle complete before we sign off.
We keep older Rex-Royal machines running after other shops have given up. For parts no longer in production we source from refurbisher networks, salvage from decommissioned units, and use validated aftermarket equivalents where the quality matches. When a repair stops making sense against the machine's value, we tell you straight.
The metal brewing unit stalls on packed grounds, a swollen seal, or a worn gearmotor after high-volume use. We strip the brew unit, clear the chamber, replace the seals and any worn cam or drive part, lubricate with food-safe grease, and verify clean cycling before the machine goes back on the counter.
A torn brew screen, a worn piston seal, or grind drifting too fine lets grounds through and flattens the shot. We inspect the brew unit, replace worn screens and seals, measure brew pressure, and recalibrate the grind and dose to bring extraction back to spec.
Milk residue narrows the foam chamber and the air-intake line, so the foam thins or collapses. We strip and sanitise the milk circuit, replace worn O-rings and the air-intake parts, test the milk pump draw, and verify foam quality across the drink menu before leaving.
Usually a milk-temperature sensor out of spec or scale in the milk-side heat path. We test the sensor against a reference probe, descale the milk circuit, and replace the sensor if it reads out of spec. Most cases are a one-visit fix.
A clear sign the daily milk clean has been skipped or the cleaning agent is exhausted. We deep-clean and sanitise the whole milk pathway, replace stained milk lines, and walk the staff through the daily cycle so it doesn't come back.
Scale insulating the heating element is the leading cause on untreated water, followed by element fatigue. We descale the circuit, test element resistance against spec, replace the element if output doesn't recover, and benchmark heat-up and hot-water throughput before reassembly.
A failed temperature sensor, a degraded element, or a relay sticking on the control board stops the boiler reaching setpoint inside the warm-up window. We test the sensor resistance against the reference table, check element resistance, inspect the relay, replace the faulty part, and clear the fault.
A weeping fitting, a worn brew-unit or hydraulic seal, or a blocked drain causing overflow. We pressure-test the circuits, dye-trace the chassis to the exact leak point, clear any drain blockage, and replace the failed seal or fitting rather than just retighten it.
A scaled level probe, a fill solenoid leaking past, a restricted supply, or an exhausted filter cartridge. We descale or replace the probe, test the solenoid, check upstream filtration, and confirm the fill cycle completes correctly.
Mississauga water profile
Moderate, 120 to 140 mg/L CaCO3 typical from the Region of Peel supply (Lake Ontario sourced, treated at the Lakeview and Lorne Park plants). Comparable to Toronto. Standard inline filtration plus a 3 to 4 month descale interval keeps Mississauga machines on spec.
Mississauga coverage
Real coverage, not a postcode list. Below are the three service zones we work most often, the kinds of operators we service in each, and the neighborhoods we cover regularly.
Independent operators along Lakeshore Road in Port Credit, Queen Street in Streetsville, and the Erin Mills retail corridor lean on commercial espresso. Scheduled maintenance and same-week emergency response keep these shops on schedule.
Over 80 Fortune 500 companies operate in Mississauga, with corporate cafeterias and executive floors running daily espresso programs. Walmart Canada, Microsoft Canada, PepsiCo Canada, RBC Insurance, and dozens of others sit inside these districts.
The Pearson hotel cluster (Hilton, Marriott, Sheraton, Delta, Westin) runs 24/7 coffee programs across lobbies, in-room amenities, and conference floors. Downtime on a banquet machine during a morning event is the call we take most often here.
Your coffee emergency ends here
Call or submit the form. We confirm your address, model, and the issue.
An experienced technician arrives, runs full diagnostics, and identifies the root cause.
You receive a flat, itemized quote. Nothing proceeds without your green light.
We complete the repair, run a test cycle, and walk you through what to watch for.
Same-day response
Mississauga customer
Our Heartland office goes through about 80 cups a day and the machine finally gave up mid-morning. A Grajqevci tech was on-site before lunch and had us back running with espresso by 1pm.
*Estimated based on the approximate distance from our nearest service centre, average commute time, and median service-call length for one machine. Prices in Canadian dollars (CAD $). Final quote provided on-site after diagnosis.
FAQ
23 answers covering response time, pricing, parts, installation, and the Mississauga service area.
Updated August 2026
Mississauga is one of our regular Rex-Royal service routes. The full lineup is in scope, legacy and discontinued platforms included. And because we're independent of Rex-Royal (no affiliation, no authorization claim), machines outside the manufacturer's service network are no problem.
Yes. Per-machine cost drops when the technician is already on-site, so multi-machine Mississauga accounts pay less per unit than single-machine calls. Typical setup for office buildings with floor-by-floor machines and hotel groups with multiple service points.
Most Mississauga Rex-Royal emergencies get same-day dispatch. If a part isn't on the truck, we diagnose on the first visit and come back the next business day with the part in hand.
No. We offer scheduled preventive maintenance because it extends machine life, but it isn't a requirement. Call us when something breaks, or set up a recurring schedule if you'd rather. Your choice.
Yes. Moderate, 120 to 140 mg/L CaCO3 typical from the Region of Peel supply (Lake Ontario sourced, treated at the Lakeview and Lorne Park plants) We test your water on-site, recommend the right filtration spec for your Rex-Royal machine and daily volume, and install it. Replacement cartridges and softener service then follow your maintenance schedule.
In most cases, yes. Older and discontinued Rex-Royal models are still serviceable. We source out-of-production parts from refurbisher networks and salvage operations, or fit aftermarket equivalents when quality matches OEM spec. When a repair stops making economic sense, we say so.
For the Rex-Royal parts we replace most often, yes. Seals, gaskets, milk system components, common solenoids, and basic sensors travel with the technician. Specialty parts (specific control boards, full brew unit assemblies) get sourced overnight.
For the parts where it matters, yes: brew units, electronic boards, sensors, pumps, motors. For commodity items like O-rings and tubing, industry-standard parts that meet or exceed OEM spec sometimes get your machine running sooner, and we use those when they do. The choice shows on the invoice.
We're not authorized or certified by Rex-Royal, and we'd rather say that plainly than fake credentials. We're independent. What you're paying for is platform expertise (we work on Rex-Royal constantly) plus the transparency and flexibility an independent shop can offer.
Most Mississauga Rex-Royal calls are answered same-day. Urgent calls placed before noon usually get same-day on-site response. When you book, we lock in an arrival window and text you when the technician is en route.
Simply. One flat rate for the visit, parts itemized at their actual cost, and no estimate that balloons mid-job. The invoice reflects what the work actually took.
Yes. Scheduled maintenance in Mississauga runs on a volume-matched cadence: quarterly for high-volume machines, every 4 months for mid-volume, semi-annual for light use. Each visit ends with a written report of what was done and what to schedule next. No contract required.
When repair cost passes roughly 50% of a refurbished replacement, or when multiple major systems are failing on a machine past 8 to 10 years of heavy use. We give you honest math on this. We'd rather lose the repair than fix something that'll break again next month.
Yes. Every Mississauga install ends with operator training: the daily cleaning cycle, basic troubleshooting, drink programming, and the symptoms that should trigger a service call. We rerun the training as your team turns over.
Yes. Hospitality is the bulk of our priority dispatch work in Mississauga. Hotels, restaurants, and QSR operators get front-of-queue slotting, off-hours scheduled maintenance, mid-service emergency dispatch, and consolidated monthly invoicing across all sites.
Most of our Mississauga Rex-Royal service work is on out-of-warranty machines. Same diagnostic discipline, same genuine parts where it matters, same straightforward pricing. Out-of-warranty does not mean second-tier service.
Most of our Mississauga Rex-Royal call volume comes out of Airport Corporate Centre, Meadowvale Business Park, Heartland Business Community, Sheridan Park. Office cafeterias, hotel programs, and restaurant operators in these clusters keep a steady rotation running through Mississauga.
We cover Mississauga broadly, with regular service in Square One / City Centre, Heartland, Meadowvale, Airport Corporate Centre, Port Credit, Streetsville, and other neighborhoods on request. At the edge of Mississauga and not sure? Call with your postal code and we'll tell you straight.
Yes. Weekend and evening dispatch is available with a modest off-hours premium, quoted upfront. Mississauga hotels, restaurants, and cafes are the usual accounts here, and we fit them in wherever the schedule allows.
Most Mississauga business customers are billed on net terms against a monthly statement. We take e-transfer, cheque, ACH, and credit card. First-time customers are typically invoiced on completion. Hospitality and recurring-service customers can request consolidated monthly invoicing.
The same in Mississauga as everywhere else: flat rate for the visit, parts billed separately. Smaller repairs just get invoiced after the work. Bigger jobs get a written quote on-site before any major work begins.
Yes, site survey through commissioning, end to end. We assess power and water, spec the right filtration, run the plumbing and electrical hookup, calibrate every drink profile, and train your staff before sign-off. Multi-unit rollouts across Mississauga get coordinated scheduling.
Independent service can affect your Rex-Royal manufacturer warranty, depending on the terms. Contact Rex-Royal's authorized network first for a covered defect. If they're slow or decline to cover the issue, call us and we'll service it on standard terms.
Call the team that services Rex-Royal machines across Mississauga regularly.
Call (289) 217-3796 now →