Fetco water treatment & cartridge service. Toronto & the GTA.
Fetco's NG 2200 touchscreen series, Plus Series, 6000-series LUXUS thermal-dispenser brewers, and 7000-series airpot brewers all live or die by sprayhead patterning, and the sprayhead is the first thing to scale on hard water. Fetco does not ship a proprietary cartridge; the install relies on the cafe's upstream water program. Everpure 7CB5 is the dealer default with the right polyphosphate chemistry for Fetco's hot tank.
We'll measure your water and size the cartridge to your machine.
Thanks. We received your request.
A Grajqevci technician will get back to you today to confirm your machine and book the visit. If it's urgent, call us directly at (289) 217-3796.
Something went wrong sending your request.
Please try again, or call us directly at (289) 217-3796 and we'll book your service over the phone. You can also email support@grajqevci.com.
Our recommendation
The filter we put on Fetco machines.
Fetco water treatment is dealer-installed upstream, an in-line cartridge between the building supply and the machine inlet, sized to your daily volume and dialled to local hardness. The machine doesn't track it, so the swap lives on a scheduled PM, not a warning light.
Our pickPentair Everpure
Recommended filter · Fetco
Pentair Everpure 7CB5-S
Most common Fetco dealer install, carbon + scale inhibitor sized to NG / Plus / 6000-series brewer volume
Fitted ahead of the machine, so scale never reaches it
Sized to your measured daily volume, bypass dialed to your feed water
Logged in our PM system and swapped before it exhausts
Cartridge capacity is rated at 10°dKH. Local GTA hardness varies, so the same cartridge runs longer in soft Toronto water than in hard Hamilton water. Find your city, get your swap interval.
Intervals assume a single cartridge sized to typical site volume. Capacity-tracked PM beats calendar-only PM, we measure feed water at commissioning and tune your specific schedule from there. Hardness data: municipal water-quality reports, updated annually.
When to swap your cartridge
Replacement signals on Fetco.
Cartridge exhaustion shows up well before the machine actually fails. Tick anything you're seeing right now and we'll read the pattern.
Nothing looks wrong for months, which is exactly why unfiltered machines fail early. Here's how the damage escalates.
Months 0-6Cosmetic
No visible signs. Scale begins precipitating onto the heating element and brew boiler. Cup quality unchanged.
Months 6-12Early wear
Visible scale at the steam tip and dispense spout. Heat-up time creeps past baseline. Carbon stage exhausts; cup tastes flat or chlorinated.
Months 12-24Degrading
Milk foam quality degrades. Brew-temperature stability drifts as boiler insulation worsens. Relief valves start sticking. Service-call frequency climbs.
Years 2-4Failure
Heating-element failure becomes common. Brew-group reseal cycles shorten. Pinhole leaks in boiler tubing. Warranty void from documented scale damage.
Year 5+Terminal
Catastrophic component failure on a 12-year platform. The repair-vs-replace tipping point hits a decade earlier than it should have.
Fetco on site
Fetco machines we filter & service across the GTA.
Our Fetco filter service
How we keep your Fetco machine running.
We commission Fetco brewers with an Everpure 7CB5 or 7FC-S sized to daily volume, add a sprayhead-delime to every PM visit, and replace the cartridge on a 6-month interval, sooner in hard zones.
*Starting intervals on the cautious side, on purpose. A hardness test and the machine's water counter tell us when to stretch them for your Fetco. Ask before you change a working schedule.
FAQ
Fetco filter questions, answered.
8 answers covering cartridges, intervals, warranty, and the local water profile.
What filter does my Fetco take?
Fetco doesn't ship with a proprietary cartridge, water treatment is dealer-installed. We standardize on Pentair Everpure 7CB5-S / 7FC-S / Claris L or 3M ICE125-S / HF40-MS sized to your daily volume. See the upstream systems table above.
How often should I replace my Fetco filter in the GTA?
Cartridge capacity is rated at 10°dKH. In moderate-hardness Toronto / Mississauga water, expect 9 to 12 months on a properly-sized cartridge. In harder York Region and Hamilton water, drop to 6 to 9 months. The full city-by-city schedule is in the GTA schedule table above.
Does Fetco require a specific filter brand for warranty?
Fetco doesn't mandate a specific brand but requires water in spec (typically 4-8°dH after the cartridge). Most installs default to Pentair Everpure. We document the install for warranty traceability.
Where does an upstream filter go in the install?
Between the building's water supply shutoff and the machine's inlet, usually mounted on the wall under a counter, with a dedicated shut-off valve and a pressure-relief loop. The cartridge head holds the calibrated bypass dial; the cartridge itself screws into the head. Service is a 5-minute cartridge swap without touching the machine itself.
Can one upstream filter feed multiple machines?
Yes if sized correctly, Everpure 7CB5-S and the larger BWT Bestmax XL are rated for multi-brewer feeds in office and foodservice manifolds. Beyond two espresso machines or two batch brewers, you're better off stepping up to a sized RO loop with magnesium remineralization. A single small cartridge feeding three high-volume machines will exhaust on capacity inside a quarter.
Do you carry the cartridges in your van for same-visit service?
Yes for the platforms we work on most, BWT Bestmax M/L/XL, Pentair Everpure Claris Ultra, Jura CLARIS Pro Smart, Saeco AquaClean CA6903, WMF AquaBasic V/M/XL, and Curtis CSC5CC00/CSC10CC00 ride on the truck. Less common cartridges (some Optipure tiers, Elektra Kwts factory softener, Melitta Cafina-branded) are ordered ahead of the visit so we land with the right part on the first trip.
Will you set up a maintenance schedule so I don't have to track it?
Yes. We commission with the install date logged against the cartridge's capacity rating and the site's measured daily volume. Our PM schedule lands cartridge swaps before exhaustion, descales the machine when the cartridge is being changed (so scale never reaches the boiler), and sends you the service log so you have warranty traceability for the manufacturer.
How much does a filter install or replacement actually cost?
Cartridge cost varies by tier, a single BWT Bestmax Premium L runs around $180 to $230 CAD, an Everpure Claris Ultra 500 sits in the same range. Installation labour on a new upstream loop is typically 1.5 to 2.5 hours depending on plumbing access. Routine cartridge swaps on an existing head are a 15-minute visit, usually folded into a PM call to save you a separate truck roll. We quote in writing before any work.
By the numbers
Numbers we earned, not numbers we brag about.
"
Their comprehensive knowledge and responsive customer service made them invaluable for our facility operations.
Brian · Facilities Manager
25+1
Years servicing equipment
4 hr2
Avg GTA response
92%3
First-visit resolution
4.74
Average client rating
1 Continuous service operations across the GTA since 2001. 2 Median on-site arrival window for urgent GTA calls placed during business hours. 3 Internal service tracking, 2024 to 2025 calendar years. 4 Calculated from verified client feedback over the past 24 months.
We measure feed-water hardness on every install, dial the bypass to the manufacturer window, and put cartridges on capacity-tracked PM so nothing scales the boiler.
